Skip to content

Zooz ZSE44 800LR Temperature and Humidity XS Sensor

One sensor for two recipes: humidity in a basement or bathroom, and a room cooling toward freezing before the pipes in it do.

By Zooz. Specs read from the maker on .

Price and stock: Maker product page (where to buy)

What the maker states
ChipZ-Wave 800 series (800LR)
Battery1 CR2450, about 12 to 14 months with normal use (Zooz estimate)
AccuracyPlus or minus 2% RH and plus or minus 0.2°C (0.36°F)
Humidity range0 to 100% RH
Operating temperature40 to 90°F
Size2.2 x 1.3 x 0.4 in
PlacementIndoor, or outdoor under an eave in the included bracket; not for freezers
Works with Home AssistantYes, through Z-Wave JS (Zooz compatible hubs list)
IP ratingNot stated by the maker

"Not stated by the maker" means the maker's pages do not say; this shelf leaves it blank rather than guess.

Know before you buy

Zooz pages disagree on operating temperature: the spec page says 40 to 90°F, one FAQ answer says 40 to 104°F; we print the narrower figure. It is rated for rooms, not below 40°F, so use it to catch a room cooling toward freezing, not inside a space that is already freezing. Warranty is 1 year standard, 5 years if registered within 30 days.

Where each spec was read

  1. Maker: Zooz support, ZSE44 Temperature Humidity XS Sensor specs read 2026-10-27
  2. Maker: Zooz support, ZSE44 FAQs (accuracy, battery life, freezer) read 2026-10-27
  3. Maker: Zooz support, ZSE44 compatible hubs read 2026-10-27

Read first

Every store link on this shelf goes to the maker's own page unless a note beside it says it is an affiliate link. The guides on sensor.house name no brand; only these shelf pages do. No maker pays for placement.

Notes drafted with a language model from the maker's pages and checked against them. Product information, not electrical or plumbing advice: a licensed electrician or plumber and your local code decide what is safe in your house.

Found an error? See Corrections.

Zooz ZSE44 800LR Temperature and Humidity XS Sensor | Sensor House