Zooz ZSE43 Tilt and Shock XS Sensor (VER 3.0)
Mounted on the top panel of a garage door, it reports open when the door tilts up, which is all the garage door recipe needs.
By Zooz. Specs read from the maker on .
Price and stock: Maker product page (where to buy)
| Chip | Z-Wave 800 series, US, CA, MX frequency |
|---|---|
| Battery | 1 CR2450, about 12 to 14 months with normal use (Zooz estimate) |
| Tilt angle | Set during installation by calibration |
| Operating temperature | 5 to 104°F |
| Size | 2.2 x 1.3 x 0.4 in |
| Range | Up to 150 ft line of sight, up to 1300 ft with Z-Wave Long Range |
| Placement | Indoor only |
| Works with Home Assistant | Yes, Home Assistant (Z-Wave JS) on Zooz's compatible hubs list |
| IP rating | Not stated by the maker |
"Not stated by the maker" means the maker's pages do not say; this shelf leaves it blank rather than guess.
Know before you buy
Specs are for VER 3.0. VER 1.0 and 2.0 use a CR2032, measure 1.9 x 1 x 0.3 in, run 32 to 104°F, and report tilt between 30 and 45 degrees. Zooz's FAQ gives 300 ft range; the spec page gives 150 ft, which we print. Warranty is 1 year standard, 5 years if registered within 30 days.
Where each spec was read
- Maker: Zooz support, ZSE43 Tilt Shock XS Sensor specs read 2026-10-27
- Maker: Zooz ZSE43 product page (garage door, battery life, hubs, warranty) read 2026-10-27
Read first
Every store link on this shelf goes to the maker's own page unless a note beside it says it is an affiliate link. The guides on sensor.house name no brand; only these shelf pages do. No maker pays for placement.
Notes drafted with a language model from the maker's pages and checked against them. Product information, not electrical or plumbing advice: a licensed electrician or plumber and your local code decide what is safe in your house.
Found an error? See Corrections.